TPL-F408E Overall Dimensions
Before selecting a two-post lift, one of the first things to check is whether the available workshop space can accommodate the equipment.
The confirmed overall dimensions of the DAYI TPL-F408E electric-controlled hydraulic two-post lift are:
| Dimension | TPL-F408E |
|---|---|
| Overall Width | 3,390 mm |
| Overall Height | 3,420 mm |
| Distance Between Columns | 2,795 mm |
| Maximum Lifting Height | 1,800 mm |
These dimensions provide the basic reference for evaluating the planned installation area.
Understanding the 3,390 mm Overall Width
The overall width of the TPL-F408E is 3,390 mm.
This measurement represents the total width of the lift structure and should be considered when checking the available horizontal space in the workshop.
However, the overall equipment width should not automatically be treated as the exact minimum width required for an installation bay.
Additional surrounding space may be required depending on the workshop layout, vehicle movement, operating requirements and installation conditions.
For this reason, workshop planning should consider both the physical dimensions of the lift and the usable space around the equipment.
Understanding the 3,420 mm Overall Height
The overall height of the TPL-F408E is 3,420 mm.
The available vertical space should therefore be checked before ordering the lift.
When evaluating a workshop, consider possible overhead restrictions such as:
- Ceiling height
- Beams
- Lighting fixtures
- Pipes
- Ventilation equipment
- Other overhead structures
The confirmed lift height provides a starting point for this assessment.
If the available ceiling height is close to the overall equipment height, the installation conditions should be confirmed before placing an order.
Distance Between Columns
The distance between the two columns is 2,795 mm.
This dimension is important when understanding the internal working area of the lift and should be reviewed together with the types of vehicles normally serviced in the workshop.
Vehicle dimensions can vary significantly, so workshop operators should not evaluate suitability based only on total lifting capacity.
Vehicle width and the available space between the lift columns should also be considered.
TPL-F408E Dimension Drawing
[Insert TPL-F408E dimension drawing here]
The dimension drawing should be used together with the specifications listed above when planning the installation position.
Key confirmed measurements to check are:
- Overall width: 3,390 mm
- Overall height: 3,420 mm
- Distance between columns: 2,795 mm
- Maximum lifting height: 1,800 mm
Planning the Workshop Bay
When planning a workshop bay for the TPL-F408E, start by checking the physical dimensions of the available area.
The lift itself measures 3,390 mm wide and 3,420 mm high, but workshop planning should also account for how the area will actually be used.
Important points to review include:
- Available workshop width
- Available ceiling height
- Position of walls and structural columns
- Vehicle entry and exit direction
- Typical vehicle dimensions
- Other equipment located near the lift
- Overhead obstacles
These checks help determine whether the proposed location is suitable for further installation planning.
Overall Dimensions Are Not the Same as Installation Requirements
The dimensions shown on this page describe the confirmed size of the TPL-F408E.
They should not be interpreted as complete installation clearance requirements.
Actual installation conditions can depend on factors that are not included in the basic product dimensions.
Before installation, additional technical requirements should be confirmed according to the actual workshop and project conditions.
Information to Prepare Before Ordering
If you are evaluating the TPL-F408E for a workshop, it is useful to prepare the following information before requesting a quotation:
- Available workshop width
- Available ceiling height
- Planned installation position
- Typical vehicle types
- Vehicle dimensions where relevant
- Local voltage
- Local frequency
- Single-phase or three-phase power supply
Providing this information makes it easier to confirm the correct lift configuration and identify potential space-related issues before ordering.
Related TPL-F408E Specifications
The TPL-F408E has a rated lifting capacity of 4,080 kg and a maximum lifting height of 1,800 mm.
For the full technical parameter list, see:
TPL-F408E Technical Specifications and Key Features
This related technical resource covers lifting capacity, lifting and lowering time, overall dimensions and available power supply configurations.
Request TPL-F408E Product Information
If you are planning a new workshop or checking whether the TPL-F408E can fit an existing service bay, send us your available workshop dimensions and electrical requirements.